Update main.py

 Conflicts:

	main.py

README.md

@@ -1 +1,14 @@
-# Bugmotion
+# Bugmotion
+
+This software is mainly intended to detect and capture bugs that are in the given area. 
+
+This is done by using the following Hardware
+
+- Pi 4 - https://www.raspberrypi.com/products/raspberry-pi-4-model-b/
+- PIR Sensor - https://www.jaycar.com.au/arduino-compatible-pir-motion-detector-module/p/XC4444?pos=1&queryId=7eb275c75b51605afa44da86b7b83db3
+- Picamera - https://www.raspberrypi.com/products/camera-module-v2/
+- LED Light - Any GPIO Compatible Kind
+- 10K Ohm Resistor - https://www.jaycar.com.au/10k-ohm-0-5-watt-metal-film-resistors-pack-of-8/p/RR0596?pos=13&queryId=60433157b9802b233ba599eda37e22f4&sort=0.relevance
+
+
+The Current Software uses Python to capture the Pictures of the bugs.

main.py

@@ -14,41 +14,54 @@ cwd = os.getcwd()                       #Sets the Current Working Directory
 
 
 
+def bugmotion():
+    GPIO.output(22, 0) #Sets light off
 
-#To stabilize sensor and Camera
-time.sleep(2)
-while True:
+    print("\nProgram Running!")
 
-    #Waits for Motion from PIR Sensor
-    pir.wait_for_motion()
+    #To stabilize sensor and Camera
+    time.sleep(2)
+    while True:
 
-    print("Bug detected")
+        #Waits for Motion from PIR Sensor
+        pir.wait_for_motion()
 
-    #Turns on the LED Flash
-    GPIO.output(22, 1)
+        print("\nBug detected")
 
-    #Sets Img path and filename, Saves to Working directory of Script
-    print("\nFile will be Saved in: " + cwd + "/Pictures")
-    file_name = cwd + "/Pictures/Capture_" + str(time.time()) + ".jpg"
-    print("\nFile Name is: " + file_name)
+        #Turns on the LED Flash
+        GPIO.output(22, 1)
+
+        #Sets Img path and filename, Saves to Working directory of Script
+        file_name = cwd + "/Pictures/Capture_" + str(time.time()) + ".jpg"
+        print("\nFile Name is: " + file_name)
 
 
-    #Used to wait for 0.1 Seconds for Camera to be ready
-    time.sleep(0.1)
+        #Used to wait for 0.1 Seconds for Camera to be ready
+        time.sleep(0.1)
 
-    #Saves File
-    camera.capture(file_name)
+        #Saves File
+        camera.capture(file_name)
 
-    #Sets PIR Sensor back to waiting for motion
-    pir.wait_for_no_motion()
-
-    #Used to turn off the LED after 0.2 Secs
-    time.sleep(0.2)
-
-    #Used to turn off the LED
-    GPIO.output(22, 0)
+        #Sets PIR Sensor back to waiting for motion
+        print("\nWaiting for no Motion!")
+        pir.wait_for_no_motion()
 
+        #Used to turn off the LED after 0.2 Secs
+        time.sleep(0.2)
 
+        #Used to turn off the LED
+        GPIO.output(22, 0)
+
+        #Used to stabilize Sensor and allow the Camera to refocus
+        time.sleep(2)
+        print("\nSystem Ready!")
+
+def exit_handler():
+    print('Program Shutting Down!')
+    GPIO.output(22, 0) # turns off LED
+
+bugmotion() #Starts Program
+atexit.register(exit_handler)